Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!think.com!mintaka!bloom-beacon!eru!hagbard!sunic!mcsun!hp4nl!dnlunx!pttrnl.nl!prak1
From: prak1@pttrnl.nl
Newsgroups: comp.music
Subject: Re: TRAKBLASTER hangs up at 20Mhz ?
Message-ID: <1991May21.164325.65068@pttrnl.nl>
Date: 21 May 91 15:43:25 GMT
References: <1991May16.125227.65063@pttrnl.nl> <kao621w164w@salamandria>
Lines: 22

In article <kao621w164w@salamandria>, tracy@salamandria (Tracy Harton) writes:
> prak1@pttrnl.nl writes:
> 
>> Can someone tell me wy TRAKBLASTER doesn't work on my 20Mhz AT ?
>> 
>> When it starts to play, the computer hangs up after a few seconds.
>> I have tried v1.4 and v2.0. and they both runs only in 12Mhz mode.
>> My default Sound Blaster interrupt setting is int7 with port 220h.
> 
>    Hmm, I'm not sure what would cause that.  The earlier versions of TB
> had the speed problem above 12Mhz, but that was fixed.  Both 1.4 and 2.0
> run on my 33Mhz 386 without any trouble.  Make sure your copy your
> ct-voice.drv file into the TB directory.  (You should be able to get the
> one used by Voxkit preconfigured..)
> 
> Tracy

Tracy, can you give me your ftp adres, tracy@salamandria doesn't work ?

thanks in advanced,

prak1@pttrnl.nl