Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!swrinde!ucsd!ucbvax!FTP.COM!backman
From: backman@FTP.COM (Larry Backman)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: TCP/IP [CUTCP/CUTE] and Novell
Message-ID: <9105210033.AA24674@ftp.com>
Date: 21 May 91 00:33:47 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 35


 >> 
 >> So I downloaded the drivers from Clarkson University to see if there might
 >> be some way for me to use the Clarkson University telnet, but it's not
 >> clear how.  Do I load the NetBIOS and then use the nb.com driver or do I
 >> use the ipxpkt driver, and do I need the 3C503 driver, do I need to issue the
 >> gwattach command, or what?
 >> 
 >> My configuration is:
 >>   Network Interface Card:  3Com 3C503, I/O=2E0h INT=5 DMA=3 BNC
 >>                              with interupts 0x7A and 0x64
 >>   IPX.COM :  IPX/SPX Ver 2.15, Etherlink II Version 2.30 Ec
 >>   NET3.COM : NetWare Ver. 2.12 rev. A
 >>   NETBIOS  : Novell Network BIOS Emulator Ver. 2.10,
 >>                with interupts 0x5C and 0x2A
 >>   GWATTACH : Racal Interlan TCP Gateway Ver. 1.0
 >>   TELNET   : Racal Interlan Ver. 1.4
 >> 
 >> I wouldn't mind having two boot configuration files if I had to.
 >> 
 >> Will it be necessary for me to consult with the network supervisor in
 >> order to get this to work?
 >>


Sorry, you lose.  You are using the Racal Interlan TCP Gateway.  It comes
with its own Telnet which uses Netbios RPC's to talk to TCP code on the
file server.  there is no way you can have it talk to a Clarkson TN as
the R-I Telnet is heavily customized to work over Netbios.




						Larry Backman
						backman@ftp.com