Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!ub!uhura.cc.rochester.edu!ee.rochester.edu!tombs
From: tombs@ee.rochester.edu (Thomas Tombs)
Newsgroups: comp.sys.amiga.emulations
Subject: Re: Amax on a 3000: need MacROM 2.0
Message-ID: <1991May21.000934.23219@ee.rochester.edu>
Date: 21 May 91 00:09:34 GMT
References: <1991May20.023602.21023@crash.cts.com> <1991May20.162512.16618@ucselx.sdsu.edu>
Organization: University of Rochester Department of Electrical Engineering
Lines: 23

>>That is wrong.  It works fine with a legitimate copy of A-MAX. This        
>>is what is needed to be done. Type in a CLI: MACROM -S disk:file, then     
>>run A-Max and click on go A-Max.  After it saves the ROM image, to run     
>>A-Max at a later dat, you *NEED* to use the -L option of MacRom.  You      
>>have to type MACROM -L disk:file to let A-Max know to get the ROM image    
>>off disk.  Then just load A-Max and go A-Max and you're all set.           
>>                                                                           
>>I think people are forgetting to use the -L option.  If you're using the   
>>-L option and it still won't work, let us know here on the net and we'll   
>>try to figure it out.                                                      

I tried this and Amax still says it can not find the cartridge.
Also, there is no file that was created that contains the rom image.
I also tried FastMax2 and it didn't work either. It says it cannot
find the file execute_me.

Any other Ideas?
(If it matters: I am using WB2.02 A-Max2.06 and an amiga 3000)

Thomas Tombs                      tombs@ee.rochester.edu
Dept. of Electrical Engineering
University of Rochester
Rochester, NY 14627