Xref: utzoo comp.sys.amiga.introduction:551 comp.sys.amiga.misc:3809 Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!pikes!mercury.cair.du.edu!mnemosyne.cs.du.edu!isis.cs.du.edu!jkummer From: jkummer@isis.cs.du.edu (James Kummer) Newsgroups: comp.sys.amiga.introduction,comp.sys.amiga.misc Subject: Re: Whats the best printer for < $600? Message-ID: <1991May21.025934.15826@mnemosyne.cs.du.edu> Date: 21 May 91 02:59:34 GMT References: Sender: usenet@mnemosyne.cs.du.edu (netnews admin account) Reply-To: jkummer@isis.UUCP (James Kummer) Distribution: comp Organization: Nyx, Public Access Unix (sponsored by U. of Denver Math/CS Lines: 33 Disclaimer1: Nyx is a public access Unix system run by the University of Disclaimer2: Denver for the Denver community. The University has neither Disclaimer3: control over nor responsibility for the opinions of users. In article billb@gdfwc3 (Bill Baumann writes: > >I'm looking for a good printer, and have somewhere less than $600 to spe d. > >Here's my minimal needs : > ------------- (portion deleted) ------------------ > - decent color for pictures in documents --------------- (portion deleted) ------------------------- >>What technologies are the best? > Laser - $$$, and forget color. > Jet - black and white is a little smeary, lower res, and the jets get > clogged. >>> >any suggestions/recommendations are much appreciated. > I have an HP PaintJet - black and white is _never_ smeary, and I don't believe that the jets have _ever_ clogged before running dry. The PaintJet II is available, so you may be able to get the original PaintJet for around $600 - I haven't checked recently. One drawback for my PaintJet: it is strongly recommended that you use the (more expensive) clay-coated paper. -- --- Regards ----------- Jim Kummer ---- ________________________________________- see disclaimer above -_______ (1st choice) jkummer@nyx.cs.du.edu \// insert favorite humorous (in a pinch) kummer@pogo.den.mmc.com // quote here <--