Xref: utzoo comp.sys.amiga.hardware:9424 comp.sys.amiga.misc:3876
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!mips!pacbell.com!att!att!cbnewsl!saify
From: saify@cbnewsl.att.com (saify.lanewala)
Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.misc
Subject: CLTD controller
Keywords: C-LTD, SCSI, ESDI Dis,k, HELP
Message-ID: <1991May23.033646.24131@cbnewsl.att.com>
Date: 23 May 91 03:36:46 GMT
Followup-To: s
Distribution: na
Organization: AT&T Bell Laboratories
Lines: 27

Hi.

I finally got around to using my old A1000.  I had a stock A1000
with 512K and two diskette drives.  I upgraded to a LUCAS/FRANCES
so I got a faster processor and 2.5MB total.  I then came into
a SCSI controller (Emulex board used in an AT&T SCSI controller)
that talks to an ESDI disk (135MB Hitachi).  So  I found someone
who sold me a C-LTD SCSI controller for the A1000.  I understand
they are no longer in business.

Problems:

I edited the mountlist for 150MB using the hdcalc program that came
with the CLTD controller so that I could get a flags value to put
into the mountlist.  However, when I try to format, I either guru
or I hang (soft reboot either way).

Question:

Does anyone out there have any experiences using the CLTD SCSI
with a LUCAS/FRANCES combo?  I'm trying to eliminate that as a
reason.

Thanks for your help.

Saify Lanewala
att!attunix!stl