Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!elroy.jpl.nasa.gov!decwrl!mcnc!wolves!deepthot!jay From: jay@deepthot.cary.nc.us (Jay Denebeim) Newsgroups: comp.sys.amiga.programmer Subject: Re: 2.0 Compatibility problem Message-ID: Date: 20 May 91 03:09:21 GMT References: <1991May16.200647.1@happy.colorado.edu> <1991May17.054910.18214@mnemosyne.cs.du.edu> Organization: The Software Distillery Lines: 28 In article <1991May17.054910.18214@mnemosyne.cs.du.edu> tscott@isis.cs.du.edu (Tony D Scott) writes: >In your previous post you were saying that the software did not run under >2.0 on an A3000. Did it by chance have a 68040 board in it. I had a >similar problem, and found that it did not have some sort of FPU code >installed (or running???). Why this caused a crash, I have no idea, since >I was not even running any FPU instructions. Everything was strictly FFP. >Anyway, have you tried it on different A3000's? Perhaps there is a program >which is commonly run under 2.0 (ARexx for example) that comes on a 3000, >and is not running on the other machines. For what its worth, all 3000's have a FPU. > In short, it's probably not a hardware thing. Just software and >coincidence. > >Tony Scott >KarmaSoft >tscott@isis -- |_o_o|\\ |. o.| || The Jay Denebeim | . | || Software | o | || Distillery | |// Address: UUCP: mcnc.org!deepthot.uucp!jay ====== Internet: jay@deepthot.cary.nc.us BBS:(919)-460-7430 VOICE:(919)-460-6934