Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!sun-barr!rutgers!bagate!cbmvax!carolyn From: carolyn@cbmvax.commodore.com (Carolyn Scheppner - CATS) Newsgroups: comp.sys.amiga.programmer Subject: Re: Multiple C Directories Message-ID: <21768@cbmvax.commodore.com> Date: 21 May 91 15:06:07 GMT References: Reply-To: carolyn@cbmvax.commodore.com (Carolyn Scheppner - CATS) Organization: Commodore, West Chester, PA Lines: 23 In article sk21s22@amiglynx.UUCP (Steve K) writes: >Is there a program that will allow you to have multiple C directories? I know >of the PATH command, but that only seems to work in the current CLI window. >I'm looking for something perminant that works in the same way. Any help >would be appreciated... 1. If you set your paths BEFORE LoadWb, all shells started from WB will have those paths. Under 2.0, such paths should be set in s:user-startup 2. use Bill Hawes' "PathMan" under 1.3 or 2.0 3. Under 2.0, the ASSIGN command can add additional paths to an assign such as C: -- ========================================================================== Carolyn Scheppner -- Tech. Mgr. CATS - Commodore Amiga Technical Support PHONE 215-431-9180 {uunet,rutgers}!cbmvax!carolyn carolyn@commodore.com I am fully operational and all of my circuits are funcTiOnINg pperrf... ==========================================================================