Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!mips!atha!aunro!ukma!usenet.ins.cwru.edu!ysub!psuvm!art100
From: ART100@psuvm.psu.edu (Andy Tefft)
Newsgroups: comp.sys.apple2
Subject: Re: Cable question
Message-ID: <91139.221935ART100@psuvm.psu.edu>
Date: 20 May 91 02:19:35 GMT
References: <17636@burdvax.PRC.Unisys.COM>
Organization: Penn State University
Lines: 11

What?

Now, assuming the //c disk interface is the same as the newer //e's
(my disk II interface takes the 20 pin flat ribbon cables), there
is no trouble hooking up an old disk II. All it takes is a little
adapter. I used a disk II on my //c for a while, until I got my
Unidisk.

Sounds like someone is trying to sell you something you don't need.

On the other hand, maybe the //e is different from the //c.