Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!swrinde!ucsd!ucbvax!van-bc!rsoft!mindlink!a1318 From: Kent_Cavaghan@mindlink.bc.ca (Kent Cavaghan) Newsgroups: comp.sys.atari.st Subject: Re: Turtle and Mega STE behaviour Message-ID: <5922@mindlink.bc.ca> Date: 19 May 91 14:27:22 GMT Organization: MIND LINK! - British Columbia, Canada Lines: 52 > hohr@cernvax.cern.ch writes: > > Msg-ID: <5320@cernvax.cern.ch> > Posted: 20 May 91 05:08:37 GMT > > Org. : CERN, European Laboratory for Particle Physics > Person: roger hoh > > > Hi Atarians, > > Just time to do a back-up on my Mega STE/4. So I decided to stop > the manual back-up story and use Turtle V3.20. > > But when I start it, I just get the following message: > > Memory configuration will fail - > > TTLEXEC.TTP: 1303D6 - 13CBF4 > RAMdisk: 7C12C - 1303D5 > Screen: 3F8000 - 3FFCFF > > I tried to .ACX all my .ACC, to .PRX all my .PRG in the \AUTO\, > still the same message. Notice that the last value of the 'Screen' > line is weird: should it not be 3FFFFF? > > Anyone an idea??? > > Thanks in advance for your help/reply. > > Roger hohr@cernvax.cern.ch Hi Roger, What I've found is that most(if not all) of the ramdisks and formatters break on the new tos. I ended up going to Diamond II to do my backups. Most of the new formatters now work, but unfortunately not the one in Diamondback II(I haven't upgraded yet :{ ). I use TLCFRT to format,now. Good Luck Kent -- ///////////////////////////////////////////////////////////////////// / Kent Cavaghan | "Machines are only Human" / / Vancouver, B.C. Canada | / /Usenet-Kent_Cavaghan@Mindlink.UUCP | Karel Capek-Czechoslovak / /F-net -Kent Cavaghan@Node #448 | Playwright-1920 / ///////////////////////////////////////////////////////////////////// / Any and All Disclaimers are Welcome Here!! / /////////////////////////////////////////////////////////////////////