Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!sdd.hp.com!hplabs!hpfcso!rjn
From: rjn@hpfcso.FC.HP.COM (Bob Niland)
Newsgroups: comp.sys.hp
Subject: Re: Parallel I/O w/ ScanJet on Series 400
Message-ID: <7370399@hpfcso.FC.HP.COM>
Date: 21 May 91 19:26:31 GMT
References: <13260.2833de1c@amherst.bitnet>
Organization: Hewlett-Packard/FSY Ft.Collins,CO,USA
Lines: 16

re: > mbfriedman@amherst.bitnet writes...

> We need some information regarding talking to an HP ScanJet through the
> parallel port on the back of a Series 400 Computer running HP-UX 7.03.  We
> have the new parallel kernel driver, and can talk to parallel printers
> fine, but we don't seem to be able to talk to the ScanJet at all.  The
> documentation we got in the shar does not cover talking to ScanJet's.  Any
> help would be appreciated

I have a contributed application (Xhpscan) which I was unable to send to
mbfriedman@amherst.bitnet ("host unknown").  Please send email to an address
below, and include a return path that can handle a 400K shar.

Regards,                                              Hewlett-Packard
Bob Niland      Internet: rjn@FC.HP.COM               3404 East Harmony Road
                UUCP: [hplabs|hpfcse]!hpfcrjn!rjn     Ft Collins CO 80525-9599