Newsgroups: comp.sys.hp
Path: utzoo!utgpu!cunews!cunews2!bnrgate!bwdls61!bwdlh128!awhitton
From: awhitton@bwdlh128.BNR.CA (Alan Whitton)
Subject: Re: SAM
Message-ID: <1991May22.172125.3835@bwdls61.bnr.ca>
Sender: usenet@bwdls61.bnr.ca (Use Net)
Reply-To: awhitton@bnr.ca
Organization: Bell Northern Research, Ottawa
References: <1331@prlhp1.prl.philips.co.uk> <5570642@hpfcdc.HP.COM> <1991May21.184707.5495@bwdls61.bnr.ca>
Date: Wed, 22 May 1991 17:21:25 GMT


In article <1991May21.184707.5495@bwdls61.bnr.ca>,
awhitton@bwdlh128.BNR.CA (Alan Whitton) writes:
|> 
|> In article <5570642@hpfcdc.HP.COM>, perry@hpfcdc.HP.COM (Perry Scott)
writes:
|> |> >When SAM replaced reconfig in HP-UX 7, I wish they had written it
|> |> >to allow the "-m" option as in reconfig, so that you could run it
|> |> >in line mode on a non-HP screen.
|> |> >
|> |> >Not having an HP screen in my office means a long walk to the Computer
|> |> >room to use the console to setup/delete users.
|> |> >
|> |> >Can obviously do this without SAM, its just that reconfig was nice to
|> |> >use.
|> |> >
|> |> >  Andy
|> |> 
|> |> We added vt100 and wyse30 support for 8.0.  Does this help ?
|> |> 
|> |> Perry
|> 
|> It helps, but what about an X11 xterm? I would have thought that was
|> the next logical choice (of course I never studied logic :-).
|> 

Many thanks to those who pointed out that in fact a XTERM is a vt100
emulation. 

Cheers,
Alan
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BNR Ottawa                   Disclaimer: "This is only my opinion"
BITNET: awhitton@bnr.ca  OR  UUCP: ...uunet!bnrgate!forum!awhitton