Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!spool.mu.edu!snorkelwacker.mit.edu!hsdndev!dartvax!mars!maine!io80141
From: IO80141@MAINE.BITNET (Steve Trefethen)
Newsgroups: comp.sys.ibm.ps2.hardware
Subject: Re: Setup Program Needed...
Message-ID: <91139.134036IO80141@MAINE.BITNET>
Date: 19 May 91 17:40:36 GMT
Article-I.D.: MAINE.91139.134036IO80141
References: <1991May16.201536.11983@murphy.com>
Distribution: usa
Organization: University of Maine System
Lines: 10


 Yes, there is a setup program that must be used to
 configure all new add-on boards for PS/2's.  The program
 can be found on the Model 70/80 reference disk.  The name of
 the program that must be executed is called SC.EXE which stands
 for Set Configuration.  Once the program is loaded it has several
 menu options for configuring the computer.  You should be able
 to just run the Automatic configuration option.  That's all
 there is to it!  Good luck.
 -steve