Xref: utzoo comp.sys.mac.apps:6195 comp.sys.mac.misc:12302
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!uwm.edu!bionet!agate!stanford.edu!neon.Stanford.EDU!torrie
From: torrie@cs.stanford.edu (Evan Torrie)
Newsgroups: comp.sys.mac.apps,comp.sys.mac.misc
Subject: Re: Excel 3.0 problem
Message-ID: <1991May21.011154.6740@neon.Stanford.EDU>
Date: 21 May 91 01:11:54 GMT
References: <283810B4.1724@deneva.sdd.trw.com> <28626@uflorida.cis.ufl.EDU>
Sender: torrie@neon.Stanford.EDU (Evan James Torrie)
Organization: Computer Science Department, Stanford University, Ca , USA
Lines: 26

dth@reef.cis.ufl.edu (David Hightower) writes:

>When I do this under 2.2a, it works fine.  Under 3.0, dragging to the
>right, up, or down works well, but dragging left has no effect; you come
>to the edge of the screen, and the display does not scroll.  So, for

  Dragging left auto-scrolls fine for me under 3.0...
  Config:  Mac IIci 5MB (13MB Virtual, 24-bit), 100MB HD, System 7.0, 
	   ten or so INITs.

  Actually, I've got a different problem with 3.0 under 7.0.  Selecting
a block of cells, then going to the Style input box on the Toolbar, and
attempting to type in a new style consistently hangs the machine, eventually
requiring a complete reboot.  
  The cursor changes to an I-beam, the text in the style box is selected, but
I can't type anything.  After about 5 seconds, the I-beam changes back to the
arrow, but there's nothing more I can do.
  The exact same procedure works when I boot under 6.0.7, but dies the above
death under 7.



-- 
------------------------------------------------------------------------------
Evan Torrie.  Stanford University, Class of 199?       torrie@cs.stanford.edu   
"And remember, whatever you do, DON'T MENTION THE WAR!"