Xref: utzoo comp.sys.mac.comm:3774 comp.sys.mac.system:5856
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!apple!han
From: han@Apple.COM (Byron Han)
Newsgroups: comp.sys.mac.comm,comp.sys.mac.system
Subject: Re: Several System 7 questions for the wise among us
Keywords: printing, networking, VMS, etc
Message-ID: <53151@apple.Apple.COM>
Date: 21 May 91 13:46:05 GMT
References: <1991May21.004834.5757@sarah.albany.edu>
Organization: Apple R&D - Networking & Communications
Lines: 24

In article <1991May21.004834.5757@sarah.albany.edu> ddl683@sarah.albany.edu (Cinderella Man) writes:
>
>Q.#2:  DEC/Mac networking:
>	I have DEC PathWORKS (by the way, VMS volume sharing under
>  Sys7 works fine).  What do I need to do to get the Comm Toolbox
>  working?  For example, if I boot MacX off the VMS container mounted on
>  the desktop, it will load and then return the error, "The Comm Toolbox
>  could not be initialized because there are no connection tools
>  installed."  I've put the Communications Folder in my new System
>  Folder, but ...

Communications Tools belong in the Extensions folder.  

By the way, do NOT install PathWorks 1.0 on top of System 7.0.  The
proper procedure is to install PathWorks on top of SYstem 6.0.x, THEN
upgrade to System 7.0.

-- 

Byron Han, CommToolbox Emir       The dream continues...                      
Apple Computer, Inc.              --------------------------------------------
20525 Mariani Ave, MS: 35CP       Internet: han@apple.COM
Cupertino, CA 95014               AppleLink: HAN1  HAN1@applelink.apple.COM
Phone: 1.408.974.6450             CompuServe: 72167,1664