Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!zaphod.mps.ohio-state.edu!function.mps.ohio-state.edu!edgar
From: edgar@function.mps.ohio-state.edu (Gerald Edgar)
Newsgroups: comp.sys.mac.hardware
Subject: Re: SCSI Ethernet adaptor for the SE (Nuvotech?)
Message-ID: <1991May21.140051.15925@zaphod.mps.ohio-state.edu>
Date: 21 May 91 14:00:51 GMT
References: <21001@albert.dsir.govt.nz>
Sender: usenet@zaphod.mps.ohio-state.edu
Organization: The Ohio State University, Dept. of Math.
Lines: 26
Nntp-Posting-Host: function.mps.ohio-state.edu

>I'm looking around for an Ethernet adaptor for my SE.  I want to put
>an accelerator in the SE's slot so I am interested in a SCSI-based
>ethernet solution.
>
>MacConnection sell the Nuvotech NuvoLink SC.  Is there some kind person

  We are using some of them here.  (With Classics, which do not support
  internal cards.)  They seem to work fine.

>need its own mains supply or does it takes its power from the Mac SCSI
>port?  

  It comes with a transformer that you plug into the wall.  So if you have
  Mac, printer and Nuvolink, you need 3 outlets.

>I will be using 10BaseT twisted pair.  Does this product support

  The version we use supports thick & thin ethernet.  There is another
  that supports 10BaseT, but I have not tried it.


--
  Gerald A. Edgar                Internet:  edgar@mps.ohio-state.edu
  Department of Mathematics      Bitnet:    EDGAR@OHSTPY
  The Ohio State University      telephone: 614-292-0395 (Office)
  Columbus, OH 43210              -292-4975 (Math. Dept.) -292-1479 (Dept. Fax)