Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!spool.mu.edu!cs.umn.edu!kksys!edgar!saylor!macgate!Uucp
From: Jim.Spencer@p510.f22.n282.z1.fidonet.org (Jim Spencer)
Newsgroups: comp.sys.mac.programmer
Subject: Another ETO problem
Message-ID: <674526024.0@macgate.fidonet>
Date: 17 May 91 03:42:52 GMT
Article-I.D.: macgate.674526024.0
Sender: Uucp@p-2370.f22.n282.z1.fidonet.org
Lines: 15


zaccone - 1393 writes in a message to All

Z-1> I'm a novice with ETO, so I'm sorry if this is an elementary 
Z-1> question. However, I'm quite frustrated. I've had ETO #3 for 
Z-1> about a month now, and I still can't get the MacApp examples 
Z-1> to compile. 

I'm far from an expert but a couple of thoughts.  

First of all, my recollection is that the installer wants to put MPW at the root level of your hard disk in a folder named MPW Folder so your MPW path should be "Hard Disk 80:MPW Folder:" rather than the "E.T.O." folder you are using.  It then wants to put MacApp in a folder named "MacApp" in your MPW folder.  This could be important because 1) this may be why your installer is failing so you are missing something important and 2) some of the paths which are set up in your startup scripts may not be correc





t. (Because everything finds itself off of where MPW is, it shouldn't matter but the only way you can be sure is to wander through them and find out.)  This may not be the problem as its been a long time since I've bothered with the installer.  Once you get an installation that works, I suggest doing updates by dragging the new stuff into the appropriate folders.

Second, the CPlus Load files feature gave me a lot of headaches.  I suggest trying to compile the examples without using the Load/Dump feature at first.  Then when you are successful with that you can try to get the dumps to work for you.  You don't show your MABuild Command line but either take out the CPlusLoad option or comment out the line in MacApp's Startup script.
 
 * Origin: White Mailer Test Point (1.0d6) (1:282/22.510)