Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!spool.mu.edu!cs.umn.edu!dmshq!pnessutt
From: pnessutt@dmshq.mn.org (Robert A. Monio)
Newsgroups: comp.sys.mips
Subject: Re: CU or TIP from a mgnum w.s.
Message-ID: <8626@dmshq.mn.org>
Date: 21 May 91 11:57:57 GMT
Article-I.D.: dmshq.8626
References: <1991May16.203038.8002@ready.eng.ready.com>
Organization: Death Fleet Command
Lines: 21

In article <1991May16.203038.8002@ready.eng.ready.com> boaz@ready.eng.ready.com writes:
>Is there anybody out there that uses or used the TIP utility (or CU) on
>RISCos 4.52   successfuly???

We regularly use cu for outbound interactive communications.  Our
configuration consists of a T2500 connected to a digiboard port on our
RC3240.

At first it wasn't easy getting the configuration to work correctly
as several register setting changes were necessary on the T2500 and
some modifications were necessary to cu and to ss.c.  After some consultation
with MIPS and a new version of cu and ss.c (patched), we were able to
make cu work reliably.

 -Bob

-- 
 Robert A. Monio                       "Politicians are the lowest form of 
 International Quality Institute, Inc.  life on the earth.  Liberal Democrats
 pnessutt@dmshq.mn.org                  are the lowest form of politician."
 ..uunet!rosevax!sialis!dmshq!pnessutt             -- George S. Patton, Jr.