Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!doug.cae.wisc.edu!news
From: plampani@dpls (Patrick Lampani)
Newsgroups: comp.sys.next
Subject: SCSI and those terminating resistors
Keywords: SCSI
Message-ID: <1991May22.175904.24099@doug.cae.wisc.edu>
Date: 22 May 91 22:59:04 GMT
Lines: 11

I have a very quick question. We have a Fujitsu 3366S drive and it works fine,  
well it did until I tried to tell it to be just another device on a SCSI bus  
rather than the only device. Now my suspicion is that I've incorrectly followed  
that techy manual they sent me with the drive. The other device (a scanner, is  
the last device and it supplies its own TERMPWR and has an external resistor  
(and it works fine even though the hard drive doesn't). Now I removed the  
internal  resistor AND jumper 3 to 4 on CNH4 as I thought that %$#$ manual told  
me to do. Does anyone know these buggers well enough to tell me where I screwed  
up?

Thanks in advance...