Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!elroy.jpl.nasa.gov!decwrl!stanford.edu!msi.umn.edu!vixvax.mgi.com!cepek
From: cepek@vixvax.mgi.com
Newsgroups: comp.terminals
Subject: Re: WYSE wy-75 setup question
Message-ID: <1991May22.094310.985@vixvax.mgi.com>
Date: 22 May 91 14:43:10 GMT
References: <kcCPhPy00VpGEC1HZd@andrew.cmu.edu>
Organization: Management Graphics, Inc.
Lines: 17

In article <kcCPhPy00VpGEC1HZd@andrew.cmu.edu>,
rh2y+@andrew.cmu.edu (Russell E. Hoffman, II) writes:
>> [question on how to kill the keyclick on WY-75]
> 
> When running, try holding down shift and hitting the return key on the numeric
> pad. This toggles keyclick on most Wyse models. You can then go into setup
> mode and do a "SAVE ALL" to make the change permanent.

On a WY-85 terminal, instead hold down the _ctrl_ key and press enter
(aka return) on the numeric keypad.  The WY-185 also works this way.

 ,---------------------------------,___________________________
/  Mike Cepek, Programmer/Analyst / Internet: CEPEK@MGI.COM   /
\  Management Graphics, Inc.      \    Voice: +1 612/851-6112 \  "Engage."
/  1401 East 79th Street          / Operator: +1 612/854-1220 /
\  Minneapolis, MN  55425  USA    \      Fax: +1 612/854-6913 \
 `--------------------------------/___________________________/