Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!samsung!munnari.oz.au!jabaru!tanus!bevans
From: bevans@tanus.oz.au (Brian Evans Esq)
Newsgroups: comp.unix.xenix.misc
Subject: Xenix 2.3.2 and TCP/IP
Message-ID: <308@jabaru.oz.au>
Date: 19 May 91 23:56:26 GMT
Sender: news@jabaru.oz.au
Organization: People-Net [tanus], Melbourne, Australia
Lines: 21

Subject: TCP/IP installation
Newsgroups: comp.unix.xenix.sco
Keywords: TCP xenix SLIP


I currently have xenix 2.3.2 installed with tcp configured for 1 SLIP line
which is currently active.  I have just installed a wd8003e ethernet 
controller and on installing the driver and relinking the kernel
I key 'netsatt -r' and the system tells me that there are 2 wdn0
interfaces on the system.

I can ping the interface from the machine however I can not talk to any
other machines on the cable and the slip connection still operates
correctly.

I have tried to delete the driver from the kernel and try installing
it again but I still have the same problem.

Can anyone assist me with this problem

much appreciated,