Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!samsung!olivea!isc-br!tau-ceti!dogear!kharma!dave From: dave@kharma Newsgroups: comp.windows.ms Subject: Re: Star Gemini 10 and Win3 Message-ID: Date: 22 May 91 17:13:12 GMT References: <14994@hacgate.UUCP> Distribution: usa Organization: Computer Concern of Springdale, WA 1-800-768-7109 Lines: 18 bill@oracle.SCG.HAC.COM (Bill Neisius) writes: > ...there. That must be it. I never even knew that > the printer had an IBM mode. The only reference in > the manual under IBM specifies setting the dip switches > for no auto linefeed, 8-bit interface. Nope, that's > the factory setting, and the current setting on the printer. That is it, but perhaps only part. The codes still are different from Epson if you have an early version of the Star Firmware ROM. A partial solution, for applications other than Windows, is to use the Star NX-1000 driver, which I understand was released into public domain by one of their engineers. I have a copy of it, if that will help. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - isc-br!tau-ceti!dogear!kharma!dave [dave@kharma] Dave Laird, SysOp: kharma The Computer Concern, Springdale, WA 258-7109 or 1-800-786-7109 kharma: 509-233-8474 (Local from Spokane Area) 24hrs 1200-14400 (HST)