Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!convex!mic!letni!rwsys!merch!cpe!adaptex!adaptx1!neese
From: neese@adaptx1.UUCP
Newsgroups: comp.periphs.scsi
Subject: Re: Help w/ AHA-1540a and DRM-600
Message-ID: <283400123@adaptx1>
Date: 24 May 91 06:49:47 GMT
References: <4037@tscs.uucp>
Lines: 23
Nf-ID: #R:tscs.uucp:4037:adaptx1:283400123:000:919
Nf-From: adaptx1.UUCP!neese    May 23 09:59:00 1991


>/* ---------- "Help w/ AHA-1540a and DRM-600" ---------- */
>
>I know that I am tempting fate but what the hell.. right.
>
>I currently have a Adaptec AHA-1540A SCSI controller that I hope to use
>with a Fujisu or Micropolis 600 plus megabyte SCSI disk drive...
>and I am also looking in to the Pioneer DRM-600 six disk changer on the
>same SCSI disk controller.
>
>Now, if the above will work correctly under DOS 3.31 or greater.. 
>at some future date I would like to add a 150 MB SCSI tape drive to
>the system.

The disk changer will require a device driver to support the commands
for this type of device.  Under DOS, you could do an ASPI device module
easy enough, that would allow support of this deivce.  There are already
many tape modules available, so tape is no problem.

			Roy Neese
			Adaptec Senior SCSI Applications Engineer
			UUCP @  neese@adaptex
				uunet!cs.utexas.edu!utacfd!merch!adaptex!neese