Newsgroups: comp.sys.3b1
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!hobbes.physics.uiowa.edu!news.iastate.edu!vancleef
From: vancleef@iastate.edu (Van Cleef Henry H)
Subject: Installing TEAC 3.5 floppy
Message-ID: <1991May25.231309.11597@news.iastate.edu>
Originator: vancleef@tbird.cc.iastate.edu
Sender: news@news.iastate.edu (USENET News System)
Organization: Iowa State University, Ames, IA
Date: Sat, 25 May 1991 23:13:09 GMT
Lines: 17

I just picked up a TEAC 3.5 floppy with the numbers FD-235F and 112-U
and a "p/n 19307321-12" on the nameplate.  In the FAQ answers from OSU
it mentions setting jumpers, but does not describe which jumpers need to
be set.  There is a set of Berg jumpers next to the power connector. How
should these be configured for the 3b1.  The 3.5/5.25 adapter comes with
a conversion connector for the floppy cable that also has a Berg jumper
set that referes to setting this for "ST: pin 34 on" and "OP: pin 34
off."  I would like to know the correct settings before opening up the
box.  

My machine is a (late) 3b1, 2meg/40meg, running o/s and dev/sys 3.51
(not yet patched to 3.51m).

-- 
Hank van Cleef  
vancleef@iastate.edu	Iowa State University, Ames. Ia.
tmn!vancleef		The Union Institute, Cincinnati, Oh.