Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!apple!netcomsv!gandrews
From: gandrews@netcom.COM (Greg Andrews)
Newsgroups: comp.sys.amiga.datacomm
Subject: Re: Worldport 9600 -> TrailBlazer
Summary: TrailBlazer is misconfigured or adjust your S7 register.
Message-ID: <1991May25.173825.26747@netcom.COM>
Date: 25 May 91 17:38:25 GMT
References: <ronald.3650@ecl014.UUCP>
Organization: Netcom - Online Communication Services  UNIX System {408 241-9760 guest}
Lines: 33

In article <ronald.3650@ecl014.UUCP> ronald@ecl014.UUCP (Ronald van Eijck) writes:
>Hello out there,
>
>I'm trying to make a connection between a Worldport 9600 modem and a
>trailblazer. Without any success sofar.
>
>This is wat happens:
>The wp dials the trailblazer
>the trailblazer gives it's connection sounds
>the trailblazer gives a sound that goes like this beep silence beep silence
>etc.
>When the trailblazer stops this sequence the worldport gives a No carrier
>message.
>
>Any ideas how to solve this?
>

Yes, make sure the TrailBlazer has its S50 register at the value of 0
rather than 255.

Since the TrailBlazer is answering with its high-speed PEP tones first,
you'll probably need to adjust the WorldPort's S7 register to a higher
value like 60 or 90.  Also make sure your comm software will wait longer
for the connection.


> Ronald van Eijck                  {eunet!}hp4nl!cbmnlux!ecl014!ronald  

-- 
 .------------------------------------------------------------------------.
 |  Greg Andrews   |       UUCP: {apple,amdahl,claris}!netcom!gandrews    |
 |                 |   Internet: gandrews@netcom.COM                      |
 `------------------------------------------------------------------------'