Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!unix.cis.pitt.edu!dsinc!widener!iggy.GW.Vitalink.COM!pacbell.com!pacbell!well!moon!aura!sjk From: sjk@aura.nbn.com (Scott J. Kramer) Newsgroups: comp.sys.amiga.hardware Subject: Re: My A3000/25/50 seems a bit slow... Why? Message-ID: Date: 22 May 91 02:24:46 GMT References: <1991May8.022802.19449@coplex.uucp> <8934@ucdavis.ucdavis.edu> Distribution: comp Organization: sjk at home Lines: 22 In-reply-to: snork@iastate.edu's message of 8 May 91 20:20:49 GMT In article snork@iastate.edu (Schuler Rodney Arnold) writes: From: snork@iastate.edu (Schuler Rodney Arnold) Newsgroups: comp.sys.amiga.hardware Date: 8 May 91 20:20:49 GMT References: <1991May8.022802.19449@coplex.uucp> <8934@ucdavis.ucdavis.edu> Sender: news@news.iastate.edu (USENET News System) Organization: Iowa State University, Ames IA Try putting CPU burst cache in your startup sequence. When my A3000/16/50 booted up with the default 2.0 startup-sequence it had the 68030's data cache disabled. The perfromance increase when I enabled the data cache was remarkable. On my A3000/25, the data cache is enabled, but data burst mode is off. Are there any possible negative side effects of enabling it? -- Scott J. Kramer UUCP: {sun,ucbvax}!pixar!aura!sjk P.O. Box 3392 Internet: sjk@aura.nbn.com San Rafael, CA 94912