Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!lll-winken!taco!eos.ncsu.edu!jmsulli
From: jmsulli@eos.ncsu.edu (JASON M SULLIVAN)
Newsgroups: comp.sys.amiga.hardware
Subject: Tektronix/Trinitron help
Keywords: RGB, A500, monitor, interface, stumped
Message-ID: <1991May26.182013.11244@ncsu.edu>
Date: 26 May 91 18:20:13 GMT
Sender: news@ncsu.edu (USENET News System)
Reply-To: jmsulli@eos.ncsu.edu (JASON M SULLIVAN)
Organization: Project EOS - North Carolina State University
Lines: 21


I am the proud (sort of) owner of a Textronix trinitron monitor (Part
No. 119-2499-00).  This
is basically another reboxed Sony 15" RGB monitor.  The connectors on
the back include
RGB BNC connecotoirs, and a Centonics-Type 14-pin 'contorller port'.

What I need tio know is: can I Hook it up to my A-500?  I've tried just
using the RGB lines from the
video port, but it won't sync right.  I also tried adding the
Horizontal/Vertical syncs and running them
to the 'controller port' on the monitor (I belive I had them each hooked
to correct pins), but then
the Amiga wouldn't boot (had a big black vertical bar in the middle of
the composite picture output).
Advice?  Ideas?  Schematics?
--
Jason M. Sullivan (OSG)            /=))     --------------
jsull@eceugs.ece.ncsu.edu         |c-oo    | "Inject Me." |
jsull@csc.ncsu.edu               //\_-   --+--------------
jmsulli@eos.ncsu.edu