Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!spool.mu.edu!uunet!mcrware!leeg
From: leeg@mcrware.UUCP (Lee Glenn)
Newsgroups: comp.sys.amiga.misc
Subject: Re: Printer driver for DMP-105?
Message-ID: <6611@mcrware.UUCP>
Date: 22 May 91 15:02:26 GMT
Article-I.D.: mcrware.6611
References: <1991May21.054044.1375@en.ecn.purdue.edu>
Reply-To: leeg@mcrware.UUCP (Lee Glenn)
Distribution: usa
Organization: Microware Systems Corp., Des Moines, Iowa
Lines: 29

In article <1991May21.054044.1375@en.ecn.purdue.edu> doctorj@en.ecn.purdue.edu (Jeffrey W Davis) writes:
>What is the proper workbench printer driver to use with a Radio Shack
>DMP-105 printer?  And where can I locate said animal ?
>
>* Jeff Davis
Newsgroups: comp.sys.amiga.misc
Subject: Re: Printer driver for DMP-105?
Summary: 
Expires: 
References: <1991May21.054044.1375@en.ecn.purdue.edu>
Sender: 
Followup-To: 
Distribution: usa
Organization: Microware Systems Corp., Des Moines, Iowa
Keywords: 

In article <1991May21.054044.1375@en.ecn.purdue.edu> doctorj@en.ecn.purdue.edu (Jeffrey W Davis) writes:
>What is the proper workbench printer driver to use with a Radio Shack
>DMP-105 printer?  And where can I locate said animal ?
>
>* Jeff Davis

I, too, am interested in a driver for my DMP-105.  Preferably under 2.0 ??

-- 
Lee Glenn - My opinions are better than a slap in the face with a dead cat.
Microware Systems Corp.		 (515) 224-1929
1900 NW 114th St., Des Moines, IA  50325
(UUCP: ...!uunet!mcrware!leeg) (Internet: leeg@mcrware.com)