Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!mips!apple!mrspoc!starnet!sschaem From: sschaem@starnet.uucp (Stephan Schaem) Newsgroups: comp.sys.amiga.programmer Subject: Re: Short Hello World Message-ID: <1991May23.055836.8362@starnet.uucp> Date: 23 May 91 05:58:36 GMT References: <1991May18.172039.7477@batcomputer.tn.cornell.edu> <1991May20.143242.10424@starnet.uucp> Organization: Starnet-Public Access UNIX-Los Altos,CA 415-949-3133, login:info Lines: 21 I think I said that I have removed all the 'support' structure code because the library just split and is changing: making it a new librarys... I wont run 680x0 binary file on a MIPS RISCS, but is interested in doing a 68000->R3000 'converter'.(I still want to programe with a macro assembler with motorola instruction set instead of C :-) Only my low level library functions are doing hardware call, and use only exec (Transparent to the software).And after the library is ported and the 68000->R3000 is done (No promesse:-) I should have ZERO problem to port code I write from both machine fully ussing a GUI... Also , for me, not using the GFX library dont let me stuck with the curent 'limitation'. I could write anther set of the GFX function for a 24 bit device, and actually open screens on any video device supported by the library. (CBM could do the same, but will they do it....) Stephan.