Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!wuarchive!uunet!cbmvax!cbmehq!cbmger!kbsaar!ghsaar!piusn From: piusn@ghsaar.UUCP (Pius Nippgen) Newsgroups: comp.sys.amiga.programmer Subject: Re: 2.0 Compatibility problem Message-ID: Date: 23 May 91 16:27:05 GMT References: <1991May16.200647.1@happy.colorado.edu> Organization: Private Amiga Site Lines: 21 In article <1991May16.200647.1@happy.colorado.edu> kskelm@happy.colorado.edu writes: > The software works fine on *EVERY* platform but A3000 under 2.0; it works >on a 500, a 1000, a 2000, a 2500 (all in both 1.3 and 2.0), and it works >on a 3000 in 1.3, but *NOT* in 2.0. > If you run Kickstart 2.0 on Amiga 3000, there is build up a MMU-Table, which doesn't like you accessing not existing memory. If you access not existing memory for instance $300000 the system will stop for 250 microseconds. If you access very often such not existing memory, your amiga will hang up. Maybe this behaviour is the reason for your problems. You can use the excellent enforcer on Fish Disk 454 or 474 for detecting the exact details. -- Best regards, Pius Nippgen VOICE: +49 6843 1522 Bergstrasse 12 UUCP: ..uunet!cbmvax!cbmehq!cbmger!kbsaar!ghsaar!piusn D-6657 Gersheim 8 GERMANY