Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!samsung!olivea!oliveb!amiga!boing!dale
From: dale@boing.UUCP (Dale Luck)
Newsgroups: comp.sys.amiga.programmer
Subject: Re: Copper & HiRes Interlace
Message-ID: <983@boing.UUCP>
Date: 24 May 91 16:16:40 GMT
References: <4892@gumby.Altos.COM>
Reply-To: dale@boing.UUCP (Dale Luck)
Organization: Boing, Milpitas, Ca.
Lines: 14

In article <4892@gumby.Altos.COM> clp@gumby.Altos.COM (Chuck L. Peterson) writes:
>When my software is in complete control of my Amiga 2000
>What I want to know is how this stuff can be done entirely within
>a COPER list.

Use two copper lists, at the end of each copper list set the
Copper location pointer to point to the other copper list.
It will then ping pong  between the two, all by itself. This is
what we did in the system software to take care of ASquared
disabling interrupts while frame grabbing.

-- 
Dale Luck     GfxBase/Boing, Inc.
{uunet!cbmvax|pyramid}!amiga!boing!dale