Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!world!lucifer
From: lucifer@world.std.com (Kevin S Green)
Newsgroups: comp.sys.apple2
Subject: Re: Monitors for the GS (Again)
Summary: Computer Shopper June91
Message-ID: <1991May24.142335.18581@world.std.com>
Date: 24 May 91 14:23:35 GMT
References: <1991May24.010515.13113@dartvax.dartmouth.edu>
Organization: The World @ Software Tool & Die
Lines: 24

In article <1991May24.010515.13113@dartvax.dartmouth.edu> anarch@eleazar.dartmouth.edu (The Anarch) writes:
|
|     OK, folks, I *know* there are some knowledgeable people out there,
|because I saw a whole slew of posts about GS monitors--frequencies, sizes,
|resolutions, inputs, outputs, all kinds of stuff.  So I will repeat my
|question to the net: does anyone know if a Magnavox CM8764 can be used
|with a GS?  Is it the same as a 1CM135?  If not, what are the differences?
[...]
Well, I can't specifically tell you if it will work. However, during my
research about GS monitors (I'm the one who was asking all those questions
about 3 weeks ago.) I picked up a copy of the latest Computer Shopper
mag. Much to my glee, they have a series of very informative articles on
the different aspects of monitor technology and what to look for. Although
the article is geared to IBM users, the information is generic enough 
that I think you would find it useful. They also give an enormous 4 or
5 page table of monitors (with their resolutions,etc) and at then end
they give telephone numbers for a huge number of manufacturers.

Since this article covers virtually everything I was going to in my
article, I've decided to just recommend the Computer Shopper issue 
instead. Armed with it, most people should be able to track down the 
rest of the imformation the need themselves (including cabling info)
-- 
Kevin S. Green / lucifer@world.std.com / {xylogics;uunet}!world!lucifer