Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!ucbvax!gnh-starport.cts.com!whitewolf From: whitewolf@gnh-starport.cts.com (Tae Song) Newsgroups: comp.sys.apple2 Subject: Re: Diversi-Tune and SynthLab problems Message-ID: Date: 26 May 91 23:05:06 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 17 X-Unparsable-Date: Sat May 25 91 at 09:41:19 (EDT) |I recently installed GS/OS 5.0.4 on my Vulcan, and it works perfectly. |However, when I try to run Diversi-Tune, the text screen says "PRESS RESET" |and the program halts. When I run SynthLab, the entire screen (including |the border) turns gray and the program halts. Neither program crashes into |the monitor, they just seem to hang. Both have worked in the past from |5.0.2, but seem to dislike the new system. Any help will be appreciated. | |Roy LeCates |lecates@chopin.udel.edu Diversi-Tune you should be booting off a 3.5" or from ProDOS 8. As for you having SynthLab working with 5.0.2... likely story... you need the MIDISynth Tool in your Tools folder. Well, I guess you MIGHT be able to run it if you had the MIDISynth Tools with System 5.0.2. INET: whitewolf@gnh-starport.cts.com UUCP: crash!gnh-starport!whitewolf ARPA: crash!gnh-starport!whitewolf@nosc.mil