Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!wuarchive!emory!gatech!bloom-beacon!eru!hagbard!sunic!ugle.unit.no!itk.unit.no!gunnarkn
From: gunnarkn@itk.unit.no (Gunnar Knutson)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Accurate timing on AT-computer
Message-ID: <1991May23.152030.7710@ugle.unit.no>
Date: 23 May 91 15:20:30 GMT
Sender: news@ugle.unit.no
Reply-To: gunnarkn@itk.unit.no (Gunnar Knutson)
Organization: Norwegian Institute of Technology / SINTEF, Trondheim, Norway
Lines: 14


-- 
	I need to time the interval between two interrupts with
accuracy in the milli-seconds range. The maximum resolution on the AT
real time clock is one second, so I can't use that. Does anyone out
there have a better idea ?


Regards, Gunnar Knutson

Division of Engineering Cybernetics	: Phone +47 7 594376
The Norwegian Institute of Technology	: Fax   +47 7 594399
N-7034 Trondheim                        : Email gunnarkn@itk.unit.no
NORWAY