Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!cis.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!ysub!psuvm!cunyvm!byuvm!byuvax!loganj
From: loganj@yvax.byu.edu
Newsgroups: comp.sys.mac.misc
Subject: MacDraw to DXF format possible?
Message-ID: <2328loganj@yvax.byu.edu>
Date: 25 May 91 00:50:47 GMT
Lines: 6

We need to use a MacDraw Document in AutoCad (on a PC) which wants
DXF format.  Any suggestions welcome?

Thanks,
Jim Logan
loganj@yvax.byu.edu
loganj@byuvax.bitnet