Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!radar!cadillac!hardin From: hardin@dino.cad.mcc.com (John Hardin) Newsgroups: comp.sys.mac.system Subject: Re: MY System 7 compatibility (Silverlining) Message-ID: Date: 24 May 91 15:10:33 GMT References: <1991May20.145224.29042@viewlogic.com> <42593@cup.portal.com> Sender: news@cadillac.CAD.MCC.COM Followup-To: comp.sys.mac.system Organization: MCC CAD Program, Austin, Texas Lines: 19 In-reply-to: Patrick.Hayes@cediag.bull.fr's message of 23 May 91 15:37:02 GMT Patrick Hayes (PH>) writes: PH> In article <42593@cup.portal.com> MacUserLabs@cup.portal.com (Stephan - Somogyi) writes: >Silverlining 5.28 or later should be used with 7.0. PH> Is this also true on non-32bit ROM machines also? I'd heard that 5.28 was only PH> needed on the 32bit clean Macs which wanted to use 32 bit adressing because PH> the drivers before 5.28 were not 32 bit clean. PH> Pat PH> -- I reformatted my P40s Quantum hard drive on my vanilla MacII using Silverlining 5.27 on which I successfully installed (and am running) system 7. -jwh -- John Hardin MCC CAD Program AT&T: 512/338-3535 3500 W. Balcones Center Drive ARPA: hardin@mcc.com Austin, TX 78759-6509 UUCP: {harvard,gatech,uunet}!cs.utexas.edu!hardin%mcc.com