Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!crdgw1!uunet!mcrware!eric
From: eric@mcrware.UUCP (Eric Miller)
Newsgroups: comp.graphics
Subject: Re: DIGITIZING 35MM SLIDES
Message-ID: <6689@mcrware.UUCP>
Date: 30 May 91 15:22:24 GMT
References: <91148.143625ATDYW@ASUACAD.BITNET>
Reply-To: eric@mcrware.UUCP (Eric Miller)
Distribution: usa
Organization: Microware Systems Corp., Des Moines, Iowa
Lines: 19

In article <91148.143625ATDYW@ASUACAD.BITNET> ATDYW@ASUACAD.BITNET writes:
>Does anyone out there known of a GOOD way to digitize 35mm slides?

I have seen a decent unit from Kodak that has a slide carousel on top and
RGB outputs on the back.  We plugged it straight into our frame grabber.

Other things we have used:

	- project the image directly into a camera with RGB outputs.

	- dismount the slides and lay them on a flatbed scanner.

	- some scanners are specially setup for transparencies and 35mm slides.

If you need more info, give me a jingle...

Eric Miller
Manager, New Media Systems
Microware Systems Corp.