Xref: utzoo comp.sys.mac.comm:3888 comp.protocols.appletalk:5943 comp.sys.mac.hypercard:6748
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!mintaka!bloom-beacon!eru!kth.se!cyklop.nada.kth.se!ulfis
From: ulfis@nada.kth.se (Anders Ulfheden)
Newsgroups: comp.sys.mac.comm,comp.protocols.appletalk,comp.sys.mac.hypercard
Subject: Problems with CTB/Apple Modem Tool and NetSerial
Message-ID: <1991May27.154304.9273@nada.kth.se>
Date: 27 May 91 15:43:04 GMT
Reply-To: ulfis@nada.kth.se (Anders Ulfheden)
Organization: Royal Institute of Technology, Stockholm, Sweden
Lines: 24


I have developed a HyperCard stack that uses Communications ToolBox and
Apple Modem Tool. It works just fine when connected to a local modem...

But, when I use NetSerial to communicate over a network the Apple Modem Tool
crashes with 'zero divide' when I call CTBOpen().
There is no problem with my CTB-code; I get exactly the same behaviour with
MacTerminal 3.0 and the Modem Tool.

I dont want to support a Hayes-compatible modem myself by using the Serial Tool
and a bunch of Hayes-commands.

Is there a way around this? A new tool from Apple perhaps? Any 3rd party tool
that can replace the buggy Apple Modem Tool?

Any hints appreciated.

Anders Ulfheden
ulfis@nada.kth.se
-- 
+------------------------------------------------------------------------------
|  Anders Ulfheden
|  USENET:  ulfis@nada.kth.se
|  Royal Institute of Technology