Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!tut.cis.ohio-state.edu!rutgers!rochester!kodak!uupsi!sunic!dkuug!imada!news
From: sms@dou.dk (Sven Meiborg Sorensen)
Newsgroups: comp.protocols.appletalk
Subject: Re: IBM's NCSATelnet on Appletalk Help.
Message-ID: <1991May27.065654.1948@imada.ou.dk>
Date: 27 May 91 06:56:54 GMT
References: <1991May25.195927.976@darwin.ntu.edu.au>
Sender: news@imada.ou.dk (USENET News System)
Reply-To: sms@dou.dk (Sven Meiborg Sorensen)
Organization: DOU-CAMPUS, Odense University, Denmark
Lines: 18

Carson,
I also had some difficulty in getting NCSA Telnet running on my PC
- but the solution was quite simple in my case. With AppleShare PC 2.0 you get
a small program called COMPAT.COM which should be executed by
your AUTOEXEC.BAT file. Telnet will then run with a simple CONFIG.TEL
looking something like the following:
   hardware=AppleTalk
   myip=RARP
   netmask=255.255.0.0
plus some session and gateway info.

Feel free to write directly to me if you need further info.

Sven.

Sven Meiborg Sorensen     Internet: sms@dou.dk
Senior Analyst
Odense University, Denmark