Path: utzoo!utgpu!watserv1!watmath!att!ucbvax!GANGES.UCOP.EDU!opschk
From: opschk@GANGES.UCOP.EDU
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Problem with ka9q, wd8003e, clarkson
Message-ID: <9105301857.AA29500@ganges.ucop.edu>
Date: 30 May 91 18:57:33 GMT
References: <1991May30.030706.12464@metro.ucc.su.OZ.AU>
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The Internet
Lines: 16

Stefan Tolhurst writes:
>Drivers started with:
>WD8003E 0x60 0x3 0x280 0xd000
>WD8003E 0x61 0x4 0x2a0 0xce00

>ka9q started as (for either WD or clarkson driver)
>ip addr 129.78.66.77
>attach packet 0x60 en0 8 1500
>route add 129.78.66.64/26 en0

If you start packet with  WD8003E 0x60 0x3 0x280 0xd000, it means you are using
IRQ 3 => in ka9q, you must use:
attach packet 0x60 en0 3 1500

		Camille Iwanowitsch Kayruzian
		opschk@ganges.ucop.edu, 415 987 03 62