Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!news.cs.indiana.edu!widener!iggy.GW.Vitalink.COM!pacbell.com!pacbell!well!moon!aura!sjk From: sjk@aura.nbn.com (Scott J. Kramer) Newsgroups: comp.sys.amiga.datacomm Subject: JR-Comm 1.02 bugs Message-ID: Date: 28 May 91 02:04:16 GMT Reply-To: sjk@aura.nbn.com Distribution: comp Organization: sjk at home Lines: 32 Howdy, I've got a few problems with JR-Comm 1.02 to report. System configuration: A3000/25Mhz; KS/WB 2.02; 16MB FAST / 2MB CHIP RAM Telebit Trailblazer+ (@19200bps) The lossages: * When dialing from the PHONE DIRECTORY requestor, the serial speed changes from 19200 to 300 immediately upon connection. Doesn't happen if I manually "ATDT..." dial. Workaround: change speed in the SERIAL PARAMETERS requestor after connecting. * When configured as a VT-100 or VT-102 with N-color screen type (i.e. *not* Workbench), JR-Comm's screen will flash after making a connection. Workaround: use the WB screen type (or VLT :-)). * When switching screen types between WB and N-color, the Workbench screen colors change. Workaround: simply running Prefs/Palette resets the original WB colors. That's it for now. Otherwise, the program works quite well. Thanx! -- Scott J. Kramer UUCP: {sun,ucbvax}!pixar!aura!sjk P.O. Box 3392 Internet: sjk@aura.nbn.com San Rafael, CA 94912