Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!news.cs.indiana.edu!widener!iggy.GW.Vitalink.COM!pacbell.com!pacbell!well!moon!aura!sjk From: sjk@aura.nbn.com (Scott J. Kramer) Newsgroups: comp.sys.amiga.datacomm Subject: Re: JR-Comm 1.02 bugs Message-ID: Date: 29 May 91 10:29:02 GMT References: Reply-To: sjk@aura.nbn.com Distribution: comp Organization: sjk at home Lines: 24 In-reply-to: sjk@aura.nbn.com's message of 27 May 91 19:04:16 In article sjk@aura.nbn.com (Scott J. Kramer) writes: Path: aura!sjk From: sjk@aura.nbn.com (Scott J. Kramer) Date: 27 May 91 19:04:16 Organization: sjk at home Newsgroups: comp.sys.amiga.datacomm Reply-to: sjk@aura.nbn.com Distribution: comp . . . * When dialing from the PHONE DIRECTORY requestor, the serial speed changes from 19200 to 300 immediately upon connection. Doesn't happen if I manually "ATDT..." dial. Workaround: change speed in the SERIAL PARAMETERS requestor after connecting. False alarm; I fixed this by disabling "Dialer auto-baud" in the Modem requester. -- Scott J. Kramer UUCP: {sun,ucbvax}!pixar!aura!sjk P.O. Box 3392 Internet: sjk@aura.nbn.com San Rafael, CA 94912