Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!hpcc05!hpyhde4!hpycla!hpcuhc!hpcupt3!brians
From: brians@hpcupt3.cup.hp.com (Brian Sullivan)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Re: More on Monitors for WB2.0
Message-ID: <47800001@hpcupt3.cup.hp.com>
Date: 28 May 91 23:17:41 GMT
References: <13216@uhccux.uhcc.Hawaii.Edu>
Organization: Hewlett Packard, Cupertino
Lines: 7


  I would recommend that you also take a look at the NEC 2A.  This
is the monitor that I got (for $379).  It is a multi-sync non-interlaced
monitor that does 800x600.  It has the full set of monitor adjustments
right there on the front of the monitor.  If you don't need 1024x768
and as far as I can tell the amiga display modes don't use any rates
above 740x512, so go with the cheaper monitor's like the NEC 2A.