Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!bu.edu!transfer!lectroid!jjmhome!crackers!cpoint!frog!rmkhome!rmk
From: rmk@rmkhome.UUCP (Rick Kelly)
Newsgroups: comp.sys.amiga.introduction
Subject: Re: Info Wanted: Quantum 52LPS
Message-ID: <9105242126.26@rmkhome.UUCP>
Date: 25 May 91 06:26:00 GMT
References: <1991May23.122237.12726@murdoch.acc.Virginia.EDU>
Reply-To: rmk@rmkhome.UUCP (Rick Kelly)
Organization: The Man With Ten Cats
Lines: 23

In article <1991May23.122237.12726@murdoch.acc.Virginia.EDU> tmb@davinci.acc.Virginia.EDU (Thomas M. Breeden) writes:
>
>I've obtained a Quantum 52LPS hard drive to go into my older
>A2000 system. (Is this the disk shipping currently with the 50MB A2000HD?).
>
>No docs came with the disk. Can some kind soul mail me helpful
>information for installing this?
>
>eg, -I see three jumper posts labeled A0, A1, A2. Do I remove all
>     three? (this is the first (and only) SCSI disk).
>    -What does the SCSI terminator look like? Is this simply a jumper
>     also.
>    -What is the correct mountlist entry?
>

For drive 0, the first drive, remove all jumpers from A0, A1, and A2.

On a Quantum Drive the SCSI terminators will be three (3) SIP resistors.
They will be socketed, and placed near the SCSI connector.

I'm not sure about other technical info as I don't have a manual either.

Rick Kelly	rmk@rmkhome.UUCP	frog!rmkhome!rmk	rmk@frog.UUCP