Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!munnari.oz.au!goanna!minyos.xx.rmit.oz.au!s902113
From: s902113@minyos.xx.rmit.oz.au (Luke Mewburn)
Newsgroups: comp.sys.amiga.misc
Subject: Re: How to reboot from RAD:
Message-ID: <1991May30.033044.18476@minyos.xx.rmit.oz.au>
Date: 30 May 91 03:30:44 GMT
References: <16315@darkstar.ucsc.edu> <19883@sdcc6.ucsd.edu>
Organization: RMIT Computer Centre, Melbourne Australia.
Lines: 19

cs180sbg@sdcc5.ucsd.edu writes:

>Hello, I have a problem with rebooting from RAD:.  I have an Amiga
>500 with 4 meg of RAM and 1.3 ROMs.  I follow the direction of the
>Amiga DOs 1.3 "enhancer" software manual and set up RAD, using the
>startup-sequence as indicated in the manual.  But when I reboot the
>computer always requires a Workbench disk instead of directly
>booting from RAD:.  How can I get this to work? Any info is
>appreciated.

Make sure you set the bootpri to high enough. (I think 0 is ok.)
  (ie. bootpri = 0  )
Anyway, if this is too difficult, email me your mountlist and relevant
startup-sequence entries, and I'll have a look.
-- 
____________________________________________________________________________
|                                     |                                    |
| Luke Mewburn   (Zak)                |      This side for lease...        |
| s902113@minyos.xx.rmit.oz.au        | (No disclaimer, can't afford it:-) |