Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!spool.mu.edu!uunet!mcsun!corton!laas!ralph From: ralph@laas.fr (Ralph P. Sobek) Newsgroups: comp.sys.atari.st.tech Subject: Re: How to add a hard disk Message-ID: Date: 28 May 91 14:01:52 GMT Article-I.D.: orion.RALPH.91May28160152 References: <1991May27.012152.6558@msuinfo.cl.msu.edu> <1991May28.114246.22657@informatik.uni-erlangen.de> Sender: news@laas.laas.fr Distribution: comp Organization: LAAS-CNRS France Lines: 17 In-reply-to: csbrod@immd4.informatik.uni-erlangen.de's message of 28 May 91 11:42:46 GMT In article <1991May28.114246.22657@informatik.uni-erlangen.de> csbrod@immd4.informatik.uni-erlangen.de (Claus Brod) writes: | ST506 interface? SCSI? ESDI? This got me thinking. Is it possible to connect a SMD hard disk such as a Fujitsu double eagle (300 Mb, approx.) to an Atari ST? The reason I ask is that I have access to a used one. By the way it has a controller that converts SMD to UNIBUS. Cheers, -- Ralph P. Sobek Disclaimer: The above ruminations are my own. ralph@laas.fr Addresses are ordered by importance. ralph@laas.uucp, or ...!uunet!laas!ralph If all else fails, try: sobek@eclair.Berkeley.EDU =============================================================================== Proud owner of a Mega 4 ST. Wishing it was a Mega STe! :-|