Xref: utzoo comp.sys.ibm.pc.hardware:9166 misc.wanted:15424
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!ucsd!swrinde!elroy.jpl.nasa.gov!lll-winken!decwrl!uunet!retix!jay
From: jay@retix.retix.com (Jay Logue)
Newsgroups: comp.sys.ibm.pc.hardware,misc.wanted
Subject: Anyone have info on a NEC Multisync monitor??
Message-ID: <1991May29.234711.8500@retix.retix.com>
Date: 29 May 91 23:47:11 GMT
Distribution: all
Organization: Retix, Santa Monica CA
Lines: 34

I have an old NEC Multisync monitor which appears to support both
digital and analog inputs via a single connector.  (The signal type is
selectable using a switch located on the back).  However, as I don't
have any docs, I don't know the configuration of the pins on the
connector when it is in analog mode.

Can anyone send me this information?  I imagine its readily available
in the user documentation that came with the monitor.

Thanks in advance!


Jay Logue

===============================================================================
INGREDIENTS: Jay Logue's personal opinions, cute signature,
physical/electronic addresses, and one or more of the following used
as a filler: assorted quotations, extraneous punctuation, white-space.

CONTAINS NO OFFICIAL EMPLOYER OPINIONS OR POSITIONS.

Not to be taken internally.  If accidentally injested, flush with
generous quantities of Jose Quervo Gold and consult your nearest
bartender immediately.
===============================================================================
Retix

USMail: 2644 30th Street, Santa Monica, CA 90405-3009 U.S.A
   Tel:	(213) 399-1611
   Fax:	(213) 458-2685
 Telex: 4944307
E-mail:	jay@retix.com
 X.400:	C=US;ADMD=TELEMAIL;PRMD=RETIX;O=OSI ONE;S=LOGUE;G=JAY
===============================================================================