Xref: utzoo comp.protocols.tcp-ip:16276 comp.protocols.tcp-ip.ibmpc:5992 comp.sys.novell:1703
Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!emory!ox.com!umich!dgsi!brian
From: brian@cimage.com (Brian Kelley)
Newsgroups: comp.protocols.tcp-ip,comp.protocols.tcp-ip.ibmpc,comp.sys.novell
Subject: Charon Problems
Message-ID: <1991May29.171834.23181@cimage.com>
Date: 29 May 91 17:18:34 GMT
Organization: Cimage Corp, Ann Arbor, MI
Lines: 31



I'm in the process of trying to make Charon 2.0A work on our network.  I
initially tried to use our Netware 3.10 server and when it didn't work
switched to our 2.15 SFT server and had the same problems.

Right now I just want to test Charon's ability to grab a job out of a Novell
queue and place it in a UNIX lpr queue.  I believe I have everything set up
correctly, but when I start charon up, I get the following message:

Info: Attaching to Queue DSI_DM/lpr
Warning: Attach failed with error ea for Queue DSI_DM/lpr, unlinking

Charon will then continue to operate and pretend everything is ok.  My
jobs do not get forwarded to my UNIX host, however.  With charon running,
when I examine my queue (lpr) with the Netware 3.10 pconsole it says there
are no attached print servers (though I would think my charon printserver,
lpr, should show up).

Has anyone else has this problem before or succeeded in getting charon to
work (esp. with Netware 386)?



  Thanks for any help!

    Brian


---
brian@cimage.com