Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!jarthur!uunet!ddtisvr.ddtg.com!taylor
From: taylor@ddtg.com (Brad Taylor)
Newsgroups: comp.unix.aux
Subject: Re: gcc under X "2.1"
Keywords: macII.cf
Message-ID: <1991May30.201628.17611@ddtg.com>
Date: 30 May 91 20:16:28 GMT
References: <24200@lanl.gov>
Sender: news@ddtg.com
Organization: DuPont Design Technologies Group
Lines: 23

In article <24200@lanl.gov> chn@lanl.gov (Charles Neil) writes:
>I installed Apple's upgrade to their X product.  They finally produced
>a compiled server that's faster than the donated one on the MIT tape
>when compiled with gcc.  Thanks Apple!  Here is the question:  how does
>one get imake to create makefiles with gcc and the proper defines?  What
>I did is to #define MacUseGcc in .../config/macII.cf.  Is this the right
>thing to do?
>-- 
>
>	-Charlie Neil (chn@lanl.gov)
>	 Los Alamos National Laboratory (505) 665-0978

Yes, it correct to define this in macII.cf. You must also use the define that comes with the
stock "site.def" file(#define CcCmd gcc -DNOSTDHDRS -fstrength-reduce -fpcc-struct-return -fw
ritable-strings -traditional). Once "imake" is compiled, you can then run "make World >& make.world"
from the "TOP" directory.


-- 
--Brad Taylor                         | FJ1200...No AMA number yet!
  Sys Admin                           | My opinions are my own, not DuPont's...
  DuPont Design Technologies Group    | Do they actually have opinions?
  taylor@ddtg.com         |