Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!zaphod.mps.ohio-state.edu!casbah.acns.nwu.edu!hayes.ims.alaska.edu!raven.alaska.edu!milton!sumax!polari!rwing!seaeast!sunbrk!Usenet
From: Kenji.Okamoto@sunbrk.FidoNet.Org (Kenji Okamoto)
Newsgroups: comp.unix.sysv386
Subject: How can I get 800*600 resolution on Intel's SVR4 (In English)
Message-ID: <675397058.10@sunbrk.FidoNet>
Date: 25 May 91 06:50:11 GMT
Sender: Usenet@sunbrk.FidoNet.Org
Lines: 33


I'm a novice user of Intel's SVR4 v.2.0 for developper's version.
I cannot set my ATI VGA wonder+(512k) to 800*600 resolution on my
x11r3.

According to the Relese Notes, 
1) rewrite kd.h as SW_GEN_800*600
2)in order to set the video card, 
       fd = open("/dev/video", O_RDWR);
       ioctl(fd, SW_GEN_800*600, 0);

I wonder how and when I should run the above 'program'.
If someone on the net knows the procedure, I would be happy to make me
know it.

The following is my environment;

	386AT clone (Hawk Computers) 33MHz with 387
        ATI VGA Wonder+ with 512K memory
        Adaptec's AHA-1542B and MAXTOR's LXT-200s + LXT-213s
        Intel's SVR4 v.2.0 from Programmer's Connection.

Thanks in advance,

ken

-- 
=====================================================================
 Kenji Okamoto  | Dept. of Earth Science, Univ. of Osaka Prefecture
                | Mozu Umemachi 4-804, Sakai, Osaka, 591 JAPAN
     okamoto@chigaku.souka.osakafu-u.ac.jp  | FAX (0722)55-2981

 * Origin: Seaeast - Fidonet<->Usenet Gateway - sunbrk (1:343/15.0)