Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!spool.mu.edu!news.cs.indiana.edu!widener!ukma!psuvax1!psuvm!barilvm!p88036
From: P88036@BARILVM.BITNET (Ephraim Vider)
Newsgroups: comp.windows.ms.programmer
Subject: Re: TPWin Debugger + SVGA Driver problem
Message-ID: <91149.174019P88036@BARILVM.BITNET>
Date: 29 May 91 10:22:17 GMT
References: <1991May28.145402.127023@rrz.uni-koeln.de>
Organization: Bar-Ilan University Computing Center, Israel
Lines: 23

In article <1991May28.145402.127023@rrz.uni-koeln.de>,
KHOFMANN@cipvax.biolan.Uni-Koeln.DE (Kay Hofmann) says:
>
>Hi,
>I have a problem when using the Turbo Windows Debugger.
>I run Windows on a 386SX computer with an EIZO MDB-10 SVGA card using
>the EIZO driver from cica.
>When i call the debugger from Windows and exit from it afterwards, the
>screen gets garbled and all actions seem to remain on a text-screen
>overlaid with the graphics screen of windows.
>When i re-install windows using standard VGA-driver, it works fine.
>Has anyone observed such problems and is there a remedy ??
>Thanks,
>         Kay

Hi,
I have seen the same problem with a Trident 8800 vga card and the
640x480x256 driver from the 2.0b version at cica.

If anyone has an explanation and/or a remedy, I would certainly like
to know about it.

         Ephraim